ABSTRACT

With the global energy demand escalating and concerns over the environmental impact of fossil fuels, there's a pressing need for cleaner, sustainable alternatives. This study highlights the potential contribution of wave energy to the power needs of coastal structures in the context of renewable energy. The research evaluates the power output and efficiency for an Oscillating Water Column (OWC) system that can be integrated into coastal structures to meet part of their power needs. Findings from both theoretical calculations and a 1:10 scale model experiment are presented. The mechanical power output and efficiency of the system for a full-scale prototype were calculated for deep water conditions with a wave height of 3m. The water surface oscillation inside the chamber is assumed to reflect the oscillation occurring outside the chamber. The maximum average mechanical power output for the full-scale prototype, corresponding to a wavelength of 22.5 m, was determined to be 64.8 kW, achieving a mechanical efficiency of 64.4 %. The overall efficiency of the system is calculated as 55 % by assuming the generator efficiency to be 85 %, resulting in an average power output of approximately 55 kW. A 1:10 scale model of the OWC system with a Wells turbine was constructed and tested in a tank for deep water conditions. Froude similarity and Keulegan-Carpenter similarity were used, ensuring a seamless transition from the model to the prototype. The OWC model was subjected to controlled heaving motion with a period of T = 1.2 s. The power generated by the OWC model illuminated four integrated 3.4 V LEDs on the Wells turbine, which were used to measure the power output produced. The power output of the model was measured to be a minimum of 0.12 W for a rotational speed of 107 rpm, which corresponds to a power output of 12 kW for the scaled-up prototype. This system has the potential for further enhancement by incorporating multiple OWCs into coastal structures exposed to wave action. Such development could facilitate meeting the power requirements of coastal structures, thereby contributing to the promotion of both renewable energy generation and a sustainable environment. Future research will focus on optimizing OWC chamber sizes for specific sites and refining the model to better capture water surface oscillation dynamics.